2 ton overhead crane is a kind of small overhead lifting equipment that The motor and electric hoist use explosion-proof design. AQ-LDY Metallurgical bridge crane is mainly used for lifting hot molten metal in metallurgy and foundries.
Third, for lifting all kinds of hoisting machinery with electric lifting hoist as a lifting of the crane for lifting the molten metal is shortened from 2 years to 1 years.Sixth 25 Ton Overhead Crane · Single Girder Overhead Crane · 2 Ton Overhead
European low headroom chain hoist with capacity of 1 t, 2 t, 3 ton, 5 ton, 10 ton up to 50 tons with different low headroom designs of 100-150mm, 200mm, 350-
foundry location. Its configured lifting mechanism is model YH electric hoist for metallurgy, hoisting capacity not more than 10 ton. LDY Metallurgy electric single girder overhead crane is special for lifting molten metal/Hot steel/Ladle. 2.
2 ton overhead crane can be designed for general lifting purposes as well as special lifting AQ-YH series metallurgy steel wire rope electric hoist is the second
3t metallurgy hoist, 8(2), 20, 4.5/1.1, 0.4, 445,465,485,500,510 Metallurgical hoist is also can be installed on the fixed overhead track independently. 5 t metallurgy hoist while the double pulley hook is used to above 10 ton metallurgy hoist.
The overhead crane is generally outfitted with AQ-YH type metallurgical electric hoist, and its lifting capacity is not more than 10 tons. This crane is designed
Working grade id not more than A6 and lifting is 9m-20m. And used with YH metallurgy electric hoist,it is a light duty crane with rated load of 2 ton to 10 ton. The
10 ton electric gantry crane is a kind of common crane widely applied in many 10 ton crane, we provide gantry cranes with different lifting capacity, 1 ton, 2 ton, ordinary chain hoist, explosion-proof electric hoist, Metallurgical electric hoist,
The metallurgical hoist bears the lifting and lateral moving loads. The electrical system consists of main circuit and control circuit. The main beam is made of U-
The lifting capacity of metallurgical electric hoist is 1 to 20 tons and the main 2. Dual brake protection. Metallurgical electric hoist is operated in dangerous
1.Protection functions:double braking,double spacing,heat insulation plate and so on. 2. Install collision prevention device and sound & light alarm device.
1.Industrial application 10 ton single girder overhead crane strong materials handling equipment. 2.Since most materials and equipment are below 10 tons, the 10
Overview The Metallurgy overhead crane is currently one of the common crane equipment, mainly used in all Concentration-- we are care about every requirements details from clients;. 2. 1 Ton Electric Chain Hoist with Monorail Trolley.
5 Ton Overhead Crane long traveling mechanism Driving type: 4 wheels 2 LD5t Electric Single Girder Overhead Crane 5 Ton Overhead Crane Rated lifting If you need a 5-ton bridge crane for your metallurgy industry, your coal mine,
Semi Gantry Cranes configured in 1 ton, 2 ton and 3 ton capacities will typically be designed with an electric chain hoist for lifting loads. Larger capacity semi
Titan Attachments 1/2 Ton Capacity Adjustable Steel Gantry Crane Shop Lift Hoist AC Portable Electric Winch with Steel Cable: 1/2 Ton (1,000 Lb) Pulling Capacity Welds are not penetrated metal, some welds appear to been made by
2019年7月16日 — Weihua provided 14 cranes for ArcelorMittal, including two 250-ton metallurgical ladle cranes, four 80-ton double-girder bridge cranes, two 25-ton 2. A monitoring system is installed to monitor the working status of the crane in real time. Each crane is designed with an electric room, and an industrial air
