Overload protection and anti-derailment protection;. 5. Over speed monitoring for main lifting mechanism;. 6. Limit switch. 320t-ladle-overhead-crane. 320t Ladle
The metallurgical overhead cranes (metallurgical bridge cranes) are intended for Ingress protection rating of electrical room and equipment not less than IP54 The load-handling device of the metallurgical dogging crane is special jaws
Metallurgical Crane Technical Requirements First, for the purpose of hoisting the molten metal by the universal bridge crane, it should be The lifting mechanism should have the function of the fault protection of the positive and lifting metal with a rated load less than or equal to 10t, the original crane must be replaced
Working condition of double girder overhead cast crane. Working temperature: Weight overload protection device with data displayer,. High quality buffer,.
Its configured lifting mechanism is model YH electric hoist for metallurgy, hoisting capacity not more than 10 ton. Current overload protection system and so on.
Metallurgical electric single girder crane mainly consists of three parts: bridge, overspeed protection, overload protection, safety braking protection, etc.
Metallurgy overhead crane has high safety, durable material, good health and safety requirements and are outfitted with proper personal protective equipment. for lifting cranes with high working class, especially for metallurgy bridge crane. traveling limiter, overload controller, inter-lock switch, rail crane should be
Weihua Metallurgical Overhead Crane is mainly used for lifting molten metal series metallurgy steel wire rope electric hoist, with working load up to 80 Ton. equipped to avoid overload and ensure safety, standard protection class IP65.
Main lifting mechanism of Weihua metallurgy overhead crane is with fast speed to meet the requirement of Overload protection and anti-derailment protection;.
5 ton Overhead cranes: Plastic making factory:10 ton Overhead crane: Plastic The lifting capacity of metallurgical electric hoist is 1 to 20 tons and the main electric hoist lifting mechanism is equipped with double limit protection, off the fire Load Q = _____ kg; Hoisting speed v = _____ m/min; Average hoisting height
Metallurgical Crane is the special lifting equipment for lifting molten metal (or non-metallic materials), heat metal and other metallurgical purposes after improved
CE Certificated Double Beam Overhead Metallurgy Crane The main hook employs the constant-spacing connection traverse as the load handling device to hoist steel ladle and the It has fire prevention heat insulation protection devices .
Metallurgy electric single girder crane can be produce according to buyer`s need. And used with YH metallurgy electric hoist,it is a light duty crane with rated load of 2 ton to 10 ton. The span is 3,High temperature heat protection system.
Metallurgy Wire rope Electric Hoist have been developed especially for the crane and double girder cranes, or it can be installed on a fixed overhead track.
A crane is a machine for lifting and lowering a load and moving it horizontally, with Hot metal handling crane means an overhead crane used for transporting or The general arrangement of the cab and the location of control and protective
terion 2, "Design Bases for Protection Against Natural. Phenomena," requires tical loads will be placed on the overhead crane system for failure of the metal due to fatigue. When a tripped by overspeed devices or overload devices in the.
作者：ВВ Варламов · 2019 — the load. Conclusion is made about feasibility and effectiveness of monitoring electrical values of lifting motor for development of overhead crane protection
