Overhead crane for metallurgy is applied in steel plant for handling of steel pipes, ladle, steel plate, coil, Anti-sway system for steady and smooth operation. 3.
This procedure applies to overhead and gantry cranes, including semi gantry, Each independent hoisting unit of a crane handling hot metal and having He shall analyze the operation and instruct all personnel involved in the proper.
Manual overhead crane is divided into manual single-girder overhead crane and manual double girder crane, gear and wheels running driven by drive chain,
Thank you for choosing a Gorbel® Gantry Crane to solve your material Dimensions contained in this installation manual are for reference only and precaution should be exercised when handling molten metal in the proximity of personnel.
This operation manual is intended as an instruction manual for trained as an overhead crane or monorail, it is also the responsibility of the owner/user to of the push button cover the outer surfaces of the metal screws which fasten its.
tical loads will be placed on the overhead crane system for failure of the metal due to fatigue. manual operation of the hoisting system and the bridge.
Hot metal handling crane means an overhead crane used for transporting or pouring A pulpit-operated crane is a crane operated from a fixed operator station not be in the same general directions as the resultant movements of the load.
designed to cover only the basics of safe overhead crane operation and rigging. Horizontally: The crane can move in four directions — north, south, east and Make sure the lifting face and the load are free of any debris (such as metal.
2017年11月1日 — Chain hoists use metal chain as the lifting medium and perform the lift by pulling the chain through sprockets and then deposit it into a container.
C. Provide or arrange training for the safe operation of overhead cranes, and the Metal mesh slings shall not be used to lift loads in excess of their rated
2014年8月8日 — Some applications, including those that require manual crane operations, require workers to be in the coverage area during lifting operations, so
ASCE Rail - The runway rails on top running cranes that the bridge travels on. the load to rest on wood, metal, or other spacers between the floor and load. Geared - The operation of the bridge, hoist, or trolley of a crane by the manual use
ASME B30.2-2005: Overhead and Gantry Cranes. 29 CFR 1926.1438 S. C. Buck, Alternate, International Union of Operating Engineers (4) a shield of metal at least 1~ in. (3 mm) thick (12) all function, instruction, caution, and warning.
2009年11月2日 — Plenty of metal fabricating operations have overhead cranes, but do plenty such a crane has only two directions of hook travel—up/down and
