Features of Weihua Metallurgy Overhead Crane: 1. It adopts Siemens PLC and Siemens inverter for control and drive. At the same time, Profinet is used for
Metallurgical overhead crane can take part in specific process operation in the process of steel production. Its basic structure is similar to the ordinary overhead
Using metallurgical lifting special motor, when the environment temperature is due to speed regulation and over 20t overhead cranes for hoisting molten metal, Fifth, hoisting molten metal crane reconstruction work should be completed
Safe operation of metallurgy overhead crane First, the crane should be installed with mechanical performance indicator, traveling limiter, overload controller, inter-lock switch, rail crane should be equipped with travelling limiter, rail-clip clamp. Before using the crane, check and test it for good condition.
This crane is mainly used in nickel ore smelting industry, lifting 850 ℃ Laterite nickel ore calcine material container, controlled by central control room, to achieve
Metallurgical Crane is the special lifting equipment for lifting molten metal (or non-metallic materials), heat metal and other metallurgical purposes after improved
The industrial overhead crane for Metallurgy is mainly used for transporting, pouring and charging hot metal in the process of smelting liquid metal, etc.
2020年9月16日 — 2. The altitude of Metallurgy Overhead Crane installation and use shall not exceed 2000m(the motor capacity shall be checked in accordance
Metallurgical crane is rely on moving along the workshop orbital direction, car lateral movement and hook lifting movement for work, suitable for metal smelting
The metallurgical hoist bears the lifting and lateral moving loads. The electrical system consists of main circuit and control circuit. The main beam is made of
Overhead crane for metallurgy is a hot-selling product series manufactured by Weihua. It is mainly used for lifting ladles, steel pipes, steel plates, coils, beam
And also the core wire rope and cable is made of high temperature resistance steel core. 4. Operation mode. Remote control and ground control are available to
An overhead crane, commonly called a bridge crane, is a type of crane found in industrial Raw materials are poured into a furnace by crane, hot metal is then rolled to specific thickness and Almost all paper mills use bridge cranes for regular maintenance needing removal of heavy press rolls and other equipment.
