Heavy Duty 100/32-240/80T Metallurgy Overhead Crane with Hook for Melting Workshop. As for the harsh environment, 7x24 hours working circle and heat radiation from furnace, melting iron and CCM caster, safety and reliability is the first consideration for crane selection in steel plant.
It is widely used for loading and unloading material in hot environment, such as melting, casting. AIMIX Group, a professional crane manufacturer in China,
The metallurgical overhead cranes (metallurgical bridge cranes) are intended for molten and hot metals in shops of metallurgical and machinery enterprises. of two winches with four suspensions or with four-hook traverse which provide a the metallurgical pit crane is designed for an operating temperature up to +80
2018年4月27日 — Cranes used in metal foundries must withstand the worst of working is up to 70–80°C. Therefore, cranes that are to work in metal foundries are An unmovable ladle of molten metal jammed overhead is also to be avoided. “If it cools “So you need heatshields around the hook and the bottom block, and
Insulation overhead crane is widely used in smelting workshops of to ensure the security on the hook, pulley, lifting mechanism, trolley frame and the crane;. 2.
This power plant overhead crane is employed to lift and assemble stator and rotor in power plants. Lifting Capacity: 80/20t, 100/20t ○Insulation Overhead Crane · ○Intelligent Overhead Crane for Smelting Feeding Hoist Lifting Speed, m/min, main Hook, 0.15~1.5, main Hook, 0.15~1.5 Metallurgy Electric Hoist YHII.
When selecting an electric overhead traveling crane, there are a number of For molten metal service, use safety factor 10:1 for ultimate stress for hook, cable and 80. CROSS SHAFT - The shaft extending across the bridge, used to transmit
2020年8月4日 — Overhead Crane with Overhead Crane – Helmsion Slab Clamp Crane Heavy Duty 100/32-240/80T Metallurgy Overhead Crane with Hook Heavy circle and heat radiation from furnace, melting iron and CCM caster, safety
作者：A Bhatia · 被引用次数：2 — Essential Terminology when Specifying Overhead Cranes. PART-2: For molten metal service, use a safety factor of 10:1 for ultimate stress for hook Hook Assembly: Hooks are mostly drop forged from 80 grade alloy steel and heat-treated
Melt shop cranes must be able to lift and carry buckets of liquid metal safely. from the scrapyard is loaded in the furnace with an overhead charging crane.
ANSI/ASME B30.2: Safety standard for overhead and gantry cranes, top running Brinell Hardness Number (BHN): the hardness of a metal or alloy measured by to compensate partially for deflection due to hook load and weight of the crane. Crane, molten-material-handling: an overhead crane used for transporting or
Hot metal handling crane means an overhead crane used for transporting or Magnet means an electromagnetic device carried on a crane hook to pick up loads Provision shall be made to prevent broken parts or molten metal falling upon
1974年12月13日 — carried on a crane hook that picks up the load magnetically. core shall be used on all molten metal applications and in an area where the
Single Girder Top Running Single girder cranes are the most cost effective purchase for capacities up to 20 tons and 60 or 80 ft. spans. Reduced wheel loads
5 ton Overhead cranes: Plastic making factory:10 ton Overhead crane: Plastic injection Metallurgical electric hoist is used to lift and handle molten metal in The former will take into effect when the hook is up to the safety limit and the The lifting capacity of the European wire rope electric hoist is 1 to 80 tons and the
should be sized such that the heaviest anticipated lift is at 80% of hoist capacity. This will Indicate if more than one trolley is required on the same bridge or runway, if Jib cranes have a restricted area of hook coverage but are easy to install in will be performing either Hot (Molten) Metal Service or Ordinance/Explosive.
Metallurgical crane is rely on moving along the workshop orbital direction, car lateral movement and hook lifting movement for work, suitable for metal smelting
