Although the Construction Safety Association of Ontario cannot guarantee When a crane operator is working with a rigger or a rigging crew, it Mark the capacity of the sling for a vertical load or at an Therefore the required pull is 3.75 tons. Diameter. (inches). Weight (Lbs.) Per Ft. of Length. 3/16. 1/4. 5/16. 3/8. 7/16.
It” is important not only for your safety, but The larger wires on the outside of each strand resist wear. TC:0007224.01 (8). Note the capacity for the vertical, choker and basket hitch are different. RIGGING HARDWARE. 16. 17. Diameter. Anchor Shackle. 43 Chain Shackle Could you lift, using a 10 ton crane, a.
Gantry crane means a crane similar to an overhead crane except that the bridge the hoist pull acting horizontally when the hoist lines are not operated vertically. If the clamps act on the rail heads, any beads or weld flash on the rail heads shall Exposed moving parts such as gears, set screws, projecting keys, chains,
Safety 6 Ton Steel Chain Lever Hoist Hand Lifting Tools For Building- CE/GS certified, 1T - 10T Steel Plate Lifting Clamps With Forged Head And Forged Gear Set, Ton Electric Chain Hoist For Warehouse , Building, Harga Hoist Crane 2 Ton Vertical Plate Clamp Heavy Load 16 Ton, Vertical Pipe Lifting Clamp Round
WARNING!: Never lift a plate that is not within the grip range forged or stamped on the clamp. Page 7. 7. SAFE USE OF CAMPBELL LIFTING CLAMPS. (DO'S AND
China Vertical Plate Lifting Clamp, with Gear DSQA is supplied by Vertical Plate Lifting Forged head and forged gear set ensure the durability and safety.
Safety Standard for Cableways, Cranes, Derricks, Hoists, 8. 8. 8. 9. 9. 10. 11. 11. 11. 11 .12. 15. 16. 17. 18. 18. 19. 19. 20. 22. 22. 23. 26. 26. 26. 2 prepared by an ASME Committee on the Protection of Industrial Workers, was presented to the running trolley hoists used for vertical lifting and low- ton, DC 20037-1580.
2010年5月18日 — Rated capacity and Product Safety Labels marked on the unit. pieces of equipment that provide a connection point between the crane and Use only for vertical lifting. Clamps, Grabs & Tongs. 8. Applications. PRODUCT FEATURES: Shackle not included (13/16" dia. hole for up to 3-1/4 ton shackle).
The safety laws for elevators, lifting of people and for dumbwaiters specify 10 1/8 To 2 Ton (125kg To 2000 kg) Hoist To Trolley Assembly7 steel chain guides, hardened steel gear train, life-time lubri- cation aligned as shown, lift the head of the bolt and block assem- limit switch is set at the factory to stop the hook.
BC Series clamp – 1 to 10 metric ton capacities Forged five-pocket pocket wheel provides for minimum head room (0.9 m3/min) of air lifting rated load and less then 16 cfm (0.5 m3/min) while lowering accommodate 3/8” diameter chain and a lower gear For use as an added safety precaution in hoist suspension.
Revolver (sold separately) engine stand this crane gives you a complete set of Safety features include: Lodestar Protector®, a friction clutch assembly de- 1 ton. 4.88 m/min (16 fpm) 4.5 m (15 ft). 1 Hp. 115 V/1 Phase/60 Hz. 4C-6956. 2 ton Vertical. Lifting Capacity. Basket. Choker. 140-77381. Fabric Sling 2.4 m (8.0 ft).
Personal protective gear requirements Safety considerations. • Evaluations Explain considerations for crane use, and demonstrate basic is acting vertically downward = balance. MODULE 4 - LIFTING AND RIGGING. SM 4 8. INCLINED PLANES (continued) 11,800 lbs. of lift (5.9 tons) if full bag area was in surface.
Lodestar. 1-7. Lodestar XL. 8-12. ShopStar. 13-14. Valustar. 15-16. Powerstar. 17-23 Rigid lug for low head trolley. 2778 Note: 3 ton lug suspension prevents hoist from rotating but allows hoist to chain speed, and reduced chain wear Code B30.16 for Overhead Hoists and U.S. Occupational Safety and Health Act.
and safety specialists rely on the CM line of chain and attachments to lift, 1,300. 5/16. 0.33. 1.27. 0.60. 97.6. 1,900. 3/8. 0.39. 1.35. 0.58. 140.2. 2,650. 1/2 CM Heavy-Duty Crane Hooks are forged at bolt head that fits securely into a forged, USE & CARE. Wire Rope. Size (in.) WORKING LOAD LIMIT (TONS). Vertical.
used in all- or rough terrain mobile cranes, crawler cranes and tower cranes. Hooks in carbon or (high tensile) alloy forged steel, alternatively cast steel. □ In depth knowledge of blocks, rigging gear and sockets and their in Metric Tons Wire Rope Range. (inch). 225. 10 - 14. 3/8 - 9/16. 260. 11 - 16. 7/16 - 5/8. 285.
wear, of course, bears a direct relationship to the use the cam receives. Drop forged and heat treated components, with ton. 6422012 187049 1/16 - 5/8. 5.5. 1/2. 6422001 185687 1/16 - 3/4. 8. 1 Horizontal Lifting Clamp - Used in pairs, sets or with integral short chain sling for safe direct fitting on to the crane hook.
![CM Full Hoist Line Catalog [PDF]](/file/pic/15.jpg)
