Breaking Test: The aim of this test is to know which is the load at which the hook collapses. A gradual tension is applied progressively that increases until
Non-Destructive Testing for Crane Hooks. There are a few types of non-destructive tests that will also reveal issues with your crane hooks. This type of testing
Non-Destructive Testing of hook and hook shank is not required by B30.10; however, a detailed inspection of hooks with heavy or severe service may show the
We utilize various proven non-destructive testing techniques in addition to a visual inspection and measurements normally performed during a hook inspection.
Crane owners pay for thousands of OSHA-mandated inspections every year. Components of each crane are examined with a critical eye, reports are generated for
The Safety Code on Mobile Cranes CSA Z150-98 Section 4.3.5.2 states that a teardown inspection shall be performed at least every 5 years or as recommended
These hooks are 100% proof tested at the factory, requiring no additional testing once installed. Eye Overhead Lifting Hook Eye Hooks: CM Herc-Alloy® Eye Hooks
LOAD TESTING of CRANES & HOISTS · New Overhead crane systems SHALL be load tested prior to being placed into service. New and existing equipment. · Existing crane
