Make sure that the lifting device seats in the saddle of the hook. Verify that the load is not heavier than the maximum load capacity. How should you move loads
Such items can become projectiles during a lift. This is the reason why crane operators or especially tag line operators should wear hard hats when operating
The rescuer also has a critical role to play when using the heavy lifting equipment such as cranes. All loads to be lifted or moved must be assessed for
For lattice boom cranes: Clearly mark the cable (so that it can easily be seen by the operator) at a point that will give the operator sufficient time to stop
So why can a crane lift its rated test load with a fully reeved block and yet fail to pick the reduced test There may be too much wire rope on the drum.
Never exceed 45 degrees, as this will put too much tension on the sling. When lifting, slowly raise the hoist to take the slack out of the slings. Then raise
Dropped loads are most commonly the result of one or more of the following factors: poor operator training, improper rigging technique, an incorrect lifting
