The camera captures and analyzes images of the hook position and issues this information to the CRANEVISION™ controller. With CRANEVISION™ the crane is made
Hoist snag detection systems can help to detect and prevent crane movement if a load gets caught. When wire rope hoists are lowered they present a chance of
The Konecranes Snag Prevention feature automatically stops crane movement in such a situation, when a hook, sling or load accidentally catches on something
When a snag is detected, traverse motion immediately stops. PUSH & PULL CONTROL Cranevision can enable crane motion to be made by simply pushing or pulling
Controlling Crane sway and snag. ANTI SNAG CONTROL WITH SENSOR. The distance values detected by the sensor are communicated by RS485 communication to the
In case of a snag load event the crane operation is stopped for a given time span due to subsequent maintenance. Why not detect a pending snag load with
Pendant control boxes shall be constructed to prevent electrical shock and shall be clearly marked for identification of functions. Equipment. Electrical
Intelli-Lift Side Pull and Off-Center Pick Technology. The Intelli-Lift System detects a load misalignment or snag condition and alerts operators with a visible
The restart of operation is made easy after a snag accident. It enables control of the trim, list, and skew of the head block by way of using an auxiliary motor
At the same time, the pressure sensor 34 will detect this pressure buildup on the interior of the hydraulic cylinder 32. As such, a signal will be transmitted
