An algorithm for assessing the stability loss of coils is proposed, on the basis of a fundamentally new approach to calculating the stress–strain state in strip
Abstract—Shape defects in coils of cold-rolled strip are analyzed. An algorithm for assessing the stability loss of coils is proposed, on the basis of a
roll bite and in a typical Cold Tandem Mill, work roll temperatures normally fall in heat” is lost to air with further losses to such things as coolant
Such surface defects can contribute to unacceptable yield losses that are typically around 80% (slab to finish plate/coil yield) by the steel plant. Examples of
“Black/Brown patch” defects on cold-rolled steel sheet surface, degrades the production Prior to cold rolling of hot rolled coil, coil is pickled in HCl.
1 Iron and steel · 2 Other metals · 3 Modern rolling · 4 Hot and cold rolling. 4.1 Hot rolling. 4.1.1 Shape rolling design. 4.2 Cold rolling · 5 Processes. 5.1 Roll
5 Dome-shaped projections or blisters in the dry paint film through local loss of adhesion and lifting of the film from the underlying surface. Blisters may
![[PDF] Analysis of coil slumping | Semantic Scholar](/file/pic/34.jpg)
