These automatic clamps for the handling of spools 4 of vertical axis of the [lacuna] type comprise a framework 1 and a set of levers and connecting rods
The grasping and lifting assembly (16) includes at least one clamping element (50) 1, can be positioned with the coil axis ACin a vertical orientation.
Alternately, the coil can be mounted so that the material is fed from a side of the coil with the coil axis in a vertical orientation. Coiled strapping material
The jaws of the rectangular profile clamp are fitted with wear-resistant protective pads. design for transporting bound wire coils with a vertical axis.
100% safety : no more manual intervention for handling/unloading coil delivered on vertical axis. ADVANTAGES OF THE SOLUTION : – The coil is Pre-load while
The latest generation of this coil clamp is suitable for moving (rebar) coils of 3 and 5-tons. An automatic mechanical system inside the clamp makes picking
This machine is equipped with a nail part The loading force is transmitted to the instruction link connected to the center of the main link via the vertical arm
Attached to the carriage is a clamp, which engages the coil through its center together with the turntable 9 as a single unit above this vertical axis.
VALTORTA srl has studied and designed a special clamp to lift and rotate the the coil is possible whether starting from the horizontal axis or vertical.
